TUV Certificate 250VAC 100A Electric Timer Relay for Utility Meters

TUV Certificate 250VAC 100A Electric Timer Relay for Utility Meters

Standard Information Dimensions(mm) 29×23.5×16
Fat ( g ) ≈40g
Contact Arrangement 1A/1B
Contact Material AgSnOtwo
Ambient Temperature -40~+75ºC
Vibration 10~50Hz,one.5mm
Shock 1000m/s²,(100g)
Specifications Knowledge Power Usage <3W
Running Voltage 10.five-16V
Max. Switching Existing 100A
Surge Current 6000A/10ms
Motor Resistance 32(1±15%)Ω
Speak to Voltage <60mV
Speak to Resistance ≤1.0mΩ
Dielectric Power Motor to Make contact with >4000VAC,fifty/60Hz 1min
Across Open Make contact with >2000VAC,50/60Hz 1min
CZPTal Existence(a hundred and twenty cycles/H) 10,000
(resistance five k + perceptual 5 k, co ϕ = .five)
Mechanical Existence(3600 cycles/H) 100,000
Pulse Time ≥60ms(Recommend 60ms~100ms)
Finding-up Time ≤60ms
Release Time ≤60ms
Insulation Resistance >1000MΩ(500VDC)

           Cautions of Latching Relay:

             1.Recommendations of relay’s input
            (1)Polarity-You should check out the polarity inside of our technological specification, if single coil then”+ -” or “- +”are fine,

            you can change it by one particular pulse.If double coil then it truly is required to affirm “-+-” or “+-+”ahead of leaving the our factory.

            (two)Driving-Please energize the relay at our advise pulse width, rated voltage for dependable performance, if one.5

            times or 2 moments of worth or reduced driving situation plz confirm with our engineer.
            (3)Relays’contact standing may possibly be changed during transportation or set up owing to influence of external drive,
            for that reason you should reset to the required position.

 

            two.Recommendations of relay’s output
            (1)When picking the relay with challenging link,remember to steer clear of the external force on load terminals in the course of or right after

            the installation.

            (2)When the relay will be linked with screw or bolts to the relays’ terminals, plz make sure your connection is

            mounted and avoid relay from damages or other safety troubles due to temp. Increase..

            (three)The sampling signal wires of items are minimal, remember to do not pull or torque throughout installation.

TUV Certificate 250VAC 100A Electric Timer Relay for Utility Meters

Tags