Position Control Servo Motor Kit for Robot & CNC

Position Control Servo Motor Kit for Robot & CNC

 Position Manage Servo Motor Package For Robot & cnc

57IV90/57IV130/57IV180 Attributes
one.Working voltage: DC enter voltage 15VDC to 50VDC ,suggest voltage is 36V
2.The max continuous output recent is 10A, the max peak current is 22A (three instances overload ability) 
three.Suitable differential or solitary-ended pulse / route command, have three control mode of situation, pace and torqe
4.Making use of FOC magnetic situation management technology and area vector pulse width modulation (SVPWM) shut-loop management engineering
5.The quantity of pulses per cycle (subdivision) can be established by the debug application or the dial change environment(electronic equipment ratio)
6.Have a few varieties of 90w,130w and 180w DC brushless servo motor to pick.
7.Have safety of overvoltage, undervoltage, overcurrent and tolerance,and so forth.
eight.Single / double pulse method, the pulse legitimate edge can be select.
nine.The max pulse frequency of management instruction is 500KHz (manufacturing unit default is 200KHz)
10.Pulse, course and permit signal input interface level is four.five to 28V suitable
11.With serial RS232 / RS485 debugging purpose, but need to use our specific serial debugging cable 
12.Functionality: clean velocity, modest overshoot ,modest tracking error, low heat of motor and driver

Driver Product And Selection Xihu (West Lake) Dis.

Motor Type  57IV90 57IV130 57IV180
Rated power(W) 90W 130W 180W
Vector Maximum Current 16A 18A 22A
Body Length(MM) 106.2 0.5 126.2 0.five 146.2 0.5
Operation Voltage fifteen-50Vdc,36Vdc recommend 
Overvoltage Protection Voltage 68Vdc±2
Control Method 32 bits DSP vector FOC control technology
Pulse Limit Frequency 500KHz(factory default 200KHz)
Defense Overcurrent, overvoltage, undervoltage and tracking error tolerance alarm
Input Signal  Pulse, direction and enable differential / single-ended interface signal,
interface level 4.5-28Vdc compatible, no need external current limiting resistor
Output Signal  Alarm / in-position signal OC output, the output capacity is100mA, need external
pull-up resistor, the maximum pull up voltage is 24Vdc
Electronic Gear Ratio Default 4000 / rev, through the DIP switch or debug software setting subdivision
(two hundred-51200)
Position Error Control Accuracy ±1 Pulse
Speed Control Accuracy  ±2 rpm
Maximum  Acceleration 100 rpm/ms

Dialing Change Options

Pulse/Rev. SW1 SW2 SW3 SW4
Default ON ON ON ON
800 OFF ON ON ON
1600 ON OFF ON ON
3200 OFF OFF ON ON
6400 ON ON OFF ON
12800 OFF ON OFF ON
25600 ON OFF OFF ON
51200 OFF OFF OFF ON
one thousand ON ON ON OFF
2000 OFF ON ON OFF
4000 ON OFF ON OFF
5000 OFF OFF ON OFF
8000 ON ON OFF OFF
10000 OFF ON OFF OFF
20000 ON OFF OFF OFF
40000 OFF OFF OFF OFF

Subdivision accuracy (electronic equipment ratio) :When SW1, SW2, SW3, SW4 are ON, the generate uses the interior default micro-phase subdivision, the default inner subdivision of the driver is 400Pulse / rev, and the digital equipment ratio can also be set by the debugging software program. SW5 established the motor direction,when turnON, the motor turns clockwise (CW),when switch OFF, the motor turns counterclockwise(CCW). SW6 control mode choice, whenON, the motor enters the self-test mode,creating a single CZPT and reverse revolution, has been recurring right up until exit self-check mode, the external control signal is invalid at self take a look at mode, whenOFF, the motor exits self-check method,then the exterior control signal is valid.

Mechanical Construction Dimension

 Driver mode Motor body length(mm) Driver thickness(mm) Integrated motor driver length(mm)
57IV90 76 30.2 106.two
57IV130  ninety six thirty.two 126.two
57IV180  116 30.two 149.2

Note : All earlier mentioned is usually employed, and we can customize in accordance to your request or pick the suitable model for you, you should tell us pursuing parameters: existing, voltage, holding torque, body length,the software region.

Application
Ideal for all types of modest and medium-sized automation equipments and devices. Such as: laser gear, health-related gear, 3D printer, little and medium-sized engraving device, digital processing products, automated crawling products, particular CNC equipment device, packaging equipment and robotic. It is especially helpful for customers who expect minimal sounds and higher pace programs.

Packaging and shipping and delivery
one.Outer packing: CZPT export carton with necessary shipping and delivery marks
two.Inner packing: Watertight packing with shock absorbing EPE and cardboard surrounded 
three.As per the clientele demands

Our provider
1.Functioning time : eight:00 a.m – ten:00 p.m .Any inquiries, you should notify us freely, we will be reply you asap.
two.Lead time : For samples, two to 5 days will be Okay. For mass manufacturing, the lead time count on the quantities you require.
three.Warrantity time period : eighteen months and Daily life-long servicing support for the merchandise.
four.We settle for goods customise.

FAQ
Q1: How to select the suitable stepper or servo motor?
A1: There are serveral important things: size, size, holding torque, voltage, present and so forth.Following confirm them and advised us, we can pick the appropriate 1 for you.

Q2: Any other methods to finalize the model?
A2: Positive, you can deliver us the design you are using, we can help you locate the suited a single.

Q3:How to guarantee the Good quality of CZPT Parts?
A3: We have the integrated program for industrial parts high quality control. We have IQC (incoming quality control), IPQCS (in procedure high quality control section), FQC (ultimate high quality control) and OQC (out-going quality handle) to manage each procedure of industrial parts prodution.

Q4:What’s the Benefit of Your Components for Sector Products? 
A4:1.The edge of our goods is the aggressive charges, rapidly supply and higher quality. Our
staff are liable-oriented, pleasant-oriented,and diligent-oriented. Our goods are showcased by strict tolerance, smooth complete and long services time.
2.Ahead of we send out the goods,we check them much more than a few times.

Get in touch with

 

Position Control Servo Motor Kit for Robot & CNC

Tags