Im-M1202 Electronic Motor Overload Protective Thermal Relay

Im-M1202 Electronic Motor Overload Protective Thermal Relay

Standard Information Dimensions(mm) 29×23.5×16
Excess weight ( g ) ≈40g
Contact Arrangement 1A/1B
Make contact with Material AgSnO2
Ambient Temperature -forty~+75ºC
Vibration ten~50Hz,1.5mm
Shock 1000m/s²,(100g)
Specifications Data Electrical power Intake <3W
Working Voltage 10.five-16V
Max. Switching Existing 100A
Surge Current 6000A/10ms
Motor Resistance 32(1±15%)Ω
Contact Voltage <60mV
Get in touch with Resistance ≤1.0mΩ
Dielectric Power Motor to Get in touch with >4000VAC,50/60Hz 1min
Across Open Contact >2000VAC,50/60Hz 1min
CZPTal Daily life(120 cycles/H) ten,000
(resistance 5 k + perceptual 5 k, co ϕ = .five)
Mechanical Existence(3600 cycles/H) a hundred,000
Pulse Time ≥60ms(Advise 60ms~100ms)
Selecting-up Time ≤60ms
Release Time ≤60ms
Insulation Resistance >1000MΩ(500VDC)

           Cautions of Latching Relay:

             1.Ideas of relay’s input
            (1)Polarity-You should examine the polarity within of our complex specification, if one coil then”+ -” or “- +”are wonderful,

            you can alter it by one particular pulse.If double coil then it is required to confirm “-+-” or “+-+”just before leaving the our manufacturing unit.

            (2)Driving-Make sure you energize the relay at our advocate pulse width, rated voltage for reliable functionality, if 1.5

            occasions or 2 moments of value or reduce driving issue plz validate with our engineer.
            (3)Relays’contact position may be transformed in the course of transportation or set up due to influence of external force,
            therefore make sure you reset to the necessary position.


            two.Ideas of relay’s output
            (one)When picking the relay with tough relationship,make sure you stay away from the external power on load terminals during or after

            the set up.

            (2)When the relay will be related with screw or bolts to the relays’ terminals, plz make certain your connection is

            fixed and prevent relay from damages or other safety issues because of to temp. Rise..

            (three)The sampling signal wires of items are minimal, make sure you do not pull or torque for the duration of set up.

Im-M1202 Electronic Motor Overload Protective Thermal Relay